Hellermanntyton Visit your local site for the relevant product catalog, pricing, service and events
Proceed
15/12/2025

Pезултати за „GL Series Galvalok“ в Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Моля обърнете внимание:  Търсената от вас комбинация от термини не връща съответстващи резултати.  По-долу има резултати, които съответстват на части от вашето търсене.

Съвет: Опитайте да промените или премахнете термини, за да подобрите уместността на резултатите от търсенето си.

1 960 продукти
Нулиране на всички
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀5.0 mm, M4 Screw, black, 100pcs.
Simple to install with a screw or rivet.
Сравнете
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀5.0 mm, M4 Screw, black, 100pcs.
MB2-PA66-BK 151-28210
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) MB2-PA66-BK 151-28210
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie outside serrated for direct fixation, 270.0x12.7mm, ⌀70.0mm, black, 500pcs.
The 1-piece design of Aerial Support Ties reduces installation time.
Сравнете
Cable tie outside serrated for direct fixation, 270.0x12.7mm, ⌀70.0mm, black, 500pcs.
TAS120M-PA66HIRHSUV-BK 111-01671
Сравнете
Добавяне към списъка с наблюдавани
1 pcs.
Black (BK) TAS120M-PA66HIRHSUV-BK 111-01671
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀8.0 mm, ⌀8.0 mm, 5/16" (M8) Screw, grey, 500pcs.
Positions bundles off cross members and frame rails to prevent abrasion and chafing.
Сравнете
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀8.0 mm, ⌀8.0 mm, 5/16" (M8) Screw, grey, 500pcs.
SAM83-PA66HIRHS-GY 151-29600
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Grey (GY) SAM83-PA66HIRHS-GY 151-29600
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀8.0 mm, ⌀8.0 mm, 5/16" (M8) Screw, black, 500pcs.
Positions bundles off cross members and frame rails to prevent abrasion and chafing.
Сравнете
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀8.0 mm, ⌀8.0 mm, 5/16" (M8) Screw, black, 500pcs.
SAOM82-PA66HIRHSUV-BK 151-29701
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) SAOM82-PA66HIRHSUV-BK 151-29701
Cable tie inside serrated, 235.0x13.1mm, ⌀12.0-50.0mm, black, 50pcs.
Releasable cable tie REL250-Series.
Сравнете
Cable tie inside serrated, 235.0x13.1mm, ⌀12.0-50.0mm, black, 50pcs.
T250S-PA66UV-BK 111-02298
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) T250S-PA66UV-BK 111-02298
Stainless steel cable tie, folding, 230x10.26mm, ⌀25.0-60mm, black, 100pcs.
MLT-Series. Releasable stainless steel buckle tie with and without coating.
Сравнете
Stainless steel cable tie, folding, 230x10.26mm, ⌀25.0-60mm, black, 100pcs.
MLT8SSC10-SS316L/SP-BK 111-91001
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) MLT8SSC10-SS316L/SP-BK 111-91001
Stainless steel cable tie, folding, 330x5.26mm, ⌀20.0-90mm, black, 100pcs.
MLT-Series. Releasable stainless steel buckle tie with and without coating.
Сравнете
Stainless steel cable tie, folding, 330x5.26mm, ⌀20.0-90mm, black, 100pcs.
MLT12SSC5-SS316L/SP-BK 111-91121
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) MLT12SSC5-SS316L/SP-BK 111-91121
Stainless steel cable tie, folding, 330x10.26mm, ⌀25.0-90mm, black, 100pcs.
MLT-Series. Releasable stainless steel buckle tie with and without coating.
Сравнете
Stainless steel cable tie, folding, 330x10.26mm, ⌀25.0-90mm, black, 100pcs.
MLT12SSC10-SS316L/SP-BK 111-91123
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) MLT12SSC10-SS316L/SP-BK 111-91123
Stainless steel cable tie, folding, 430x10.26mm, ⌀25.0-120mm, black, 100pcs.
MLT-Series. Releasable stainless steel buckle tie with and without coating.
Сравнете
Stainless steel cable tie, folding, 430x10.26mm, ⌀25.0-120mm, black, 100pcs.
MLT16SSC10-SS316L/SP-BK 111-91163
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) MLT16SSC10-SS316L/SP-BK 111-91163
Stainless steel cable tie, folding, 430x5.26mm, ⌀20.0-120mm, black, 100pcs.
MLT-Series. Releasable stainless steel buckle tie with and without coating.
Сравнете
Stainless steel cable tie, folding, 430x5.26mm, ⌀20.0-120mm, black, 100pcs.
MLT16SSC5-SS316L/SP-BK 111-91161
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) MLT16SSC5-SS316L/SP-BK 111-91161
Stainless steel cable tie, folding, 630x5.26mm, ⌀20.0-180mm, black, 100pcs.
MLT-Series. Releasable stainless steel buckle tie with and without coating.
Сравнете
Stainless steel cable tie, folding, 630x5.26mm, ⌀20.0-180mm, black, 100pcs.
MLT24SSC5-SS316L/SP-BK 111-91180
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) MLT24SSC5-SS316L/SP-BK 111-91180
Stainless steel cable tie, folding, 630x10.26mm, ⌀25.0-180mm, black, 100pcs.
MLT-Series. Releasable stainless steel buckle tie with and without coating.
Сравнете
Stainless steel cable tie, folding, 630x10.26mm, ⌀25.0-180mm, black, 100pcs.
MLT24SSC10-SS316L/SP-BK 111-91181
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) MLT24SSC10-SS316L/SP-BK 111-91181
Stainless steel cable tie, ladder style, 330x7.0mm, ⌀10.0-90mm, black, 100pcs.
MAT-Series. Stainless steel ladderstyle cable ties with and without coating.
Сравнете
Stainless steel cable tie, ladder style, 330x7.0mm, ⌀10.0-90mm, black, 100pcs.
MAT12SSC7-SS316/SP-BK 111-96120
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) MAT12SSC7-SS316/SP-BK 111-96120
Stainless steel cable tie, ladder style, 230x7.0mm, ⌀10.0-60mm, black, 100pcs.
MAT-Series. Stainless steel ladderstyle cable ties with and without coating.
Сравнете
Stainless steel cable tie, ladder style, 230x7.0mm, ⌀10.0-60mm, black, 100pcs.
MAT8SSC7-SS316/SP-BK 111-92004
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) MAT8SSC7-SS316/SP-BK 111-92004
Stainless steel cable tie, ladder style, 430x7.0mm, ⌀10.0-120mm, black, 100pcs.
MAT-Series. Stainless steel ladderstyle cable ties with and without coating.
Сравнете
Stainless steel cable tie, ladder style, 430x7.0mm, ⌀10.0-120mm, black, 100pcs.
MAT16SSC7-SS316/SP-BK 111-92162
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) MAT16SSC7-SS316/SP-BK 111-92162
Stainless steel cable tie, ladder style, 630x7.0mm, ⌀10.0-180mm, black, 100pcs.
MAT-Series. Stainless steel ladderstyle cable ties with and without coating.
Сравнете
Stainless steel cable tie, ladder style, 630x7.0mm, ⌀10.0-180mm, black, 100pcs.
MAT24SSC7-SS316/SP-BK 111-92200
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) MAT24SSC7-SS316/SP-BK 111-92200
Stainless steel cable tie mount for screw fixation, untreated, Wmax=10.0mm, metal, 100pcs.
Сравнете
Stainless steel cable tie mount for screw fixation, untreated, Wmax=10.0mm, metal, 100pcs.
SSPC5-SS316L-ML 151-00838
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Metal (ML) SSPC5-SS316L-ML 151-00838
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, brown, 500pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, brown, 500pcs.
T50ROSFTM6SO12.5A-PA46-BN 157-00212
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Brown (BN) T50ROSFTM6SO12.5A-PA46-BN 157-00212
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, brown, 500pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, brown, 500pcs.
T50ROSFT6SO25A-PA46-BN 157-00158
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Brown (BN) T50ROSFT6SO25A-PA46-BN 157-00158
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, brown, 500pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, brown, 500pcs.
T50ROSFT8SO25A-PA46-BN 157-00168
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Brown (BN) T50ROSFT8SO25A-PA46-BN 157-00168
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.
T50ROSFTM6SO12.5B-PA66HIRHSUV-BK 157-00131
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50ROSFTM6SO12.5B-PA66HIRHSUV-BK 157-00131
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, brown, 500pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, brown, 500pcs.
T50ROSFT6SO25B-PA46-BN 157-00186
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Brown (BN) T50ROSFT6SO25B-PA46-BN 157-00186
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.
T50ROSFT8SO25B-PA66HIRHSUV-BK 157-00170
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50ROSFT8SO25B-PA66HIRHSUV-BK 157-00170
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.
T50ROSFTM6SO25B-PA66HIRHSUV-BK 157-00172
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50ROSFTM6SO25B-PA66HIRHSUV-BK 157-00172
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 500pcs.
T50ROSFT825SO-PA66HIRHSUV-BK 157-00196
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50ROSFT825SO-PA66HIRHSUV-BK 157-00196
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 1000pcs.
The fir tree mount cable tie is an all-in-one bundling and fastening solution that reduces costs and assembly time.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀2.0-50.0mm, black, 1000pcs.
T50ROSFT812.5SO-PA66HIRHSUV-BK 157-00217
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) T50ROSFT812.5SO-PA66HIRHSUV-BK 157-00217
Cable tie inside serrated, 307.0x12.7mm, ⌀9.5-82.5mm, black, 300pcs.
Сравнете
Cable tie inside serrated, 307.0x12.7mm, ⌀9.5-82.5mm, black, 300pcs.
WSI-PA66HIRHSUV-BK 111-12301
Сравнете
Добавяне към списъка с наблюдавани
300 pcs.
Black (BK) WSI-PA66HIRHSUV-BK 111-12301
Fixing tie for hole (round), outside serrated, ⌀27.0-44.0mm, black, 100pcs.
Fixing ties with rivet especially for safe fixing.
Сравнете
Fixing tie for hole (round), outside serrated, ⌀27.0-44.0mm, black, 100pcs.
RELF170-PA66HIR-BK 115-40902
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) RELF170-PA66HIR-BK 115-40902
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for hole (round), not serrated, ⌀42.0mm, black, 500pcs.
Сравнете
Fixing tie for hole (round), not serrated, ⌀42.0mm, black, 500pcs.
FBR6/140-PA66-BK 150-27140
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) FBR6/140-PA66-BK 150-27140
Fixing tie for stud, inside serrated, ⌀9.5-57.1mm, black, 300pcs.
Tie utilizes a strong hinge between the stud mount and strap head to provide superior holding ability.
Сравнете
Fixing tie for stud, inside serrated, ⌀9.5-57.1mm, black, 300pcs.
WSS380-PA66HIRHSUV-BK 157-00403
Сравнете
Добавяне към списъка с наблюдавани
300 bag
Black (BK) WSS380-PA66HIRHSUV-BK 157-00403
Fixing tie for stud, inside serrated, ⌀9.5-105.0mm, black, 300pcs.
Tie utilizes a strong hinge between the stud mount and strap head to provide superior holding ability.
Сравнете
Fixing tie for stud, inside serrated, ⌀9.5-105.0mm, black, 300pcs.
WSR380-PA66HIRHSUV-BK 157-00405
Сравнете
Добавяне към списъка с наблюдавани
300 bag
Black (BK) WSR380-PA66HIRHSUV-BK 157-00405
Fixing tie for stud, ⌀5.0-60.0mm, black, 25pcs.
Сравнете
Fixing tie for stud, ⌀5.0-60.0mm, black, 25pcs.
SBT120-M6-PA66HSUV-BK 157-00022
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
25 pcs.
Black (BK) SBT120-M6-PA66HSUV-BK 157-00022
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for stud, ⌀5.0-35.0mm, black, 50pcs.
Сравнете
Fixing tie for stud, ⌀5.0-35.0mm, black, 50pcs.
SBT50-M12-PA66HSUV-BK 157-00025
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) SBT50-M12-PA66HSUV-BK 157-00025
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for stud, ⌀5.0-35.0mm, black, 50pcs.
Сравнете
Fixing tie for stud, ⌀5.0-35.0mm, black, 50pcs.
SBT50-M8-PA66HSUV-BK 157-00027
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) SBT50-M8-PA66HSUV-BK 157-00027
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Fixing tie for stud, inside serrated, ⌀9.5-82.5mm, black, 300pcs.
Tie utilizes a strong hinge between the stud mount and strap head to provide superior holding ability.
Сравнете
Fixing tie for stud, inside serrated, ⌀9.5-82.5mm, black, 300pcs.
WSI8MM-PA66HIRHSUV-BK 157-00035
Сравнете
Добавяне към списъка с наблюдавани
300 pcs.
Black (BK) WSI8MM-PA66HIRHSUV-BK 157-00035
Fixing tie for stud, inside serrated, ⌀9.5-105.0mm, black, 300pcs.
Wide strap cable tie with 8 mm stud mount.
Сравнете
Fixing tie for stud, inside serrated, ⌀9.5-105.0mm, black, 300pcs.
WSR8MM-PA66HIRHSUV-BK 157-00036
Сравнете
Добавяне към списъка с наблюдавани
300 pcs.
Black (BK) WSR8MM-PA66HIRHSUV-BK 157-00036
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.
Сравнете
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, black, 100pcs.
T50SOSSBD-M5-PA66HSUV-BK 157-00044
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) T50SOSSBD-M5-PA66HSUV-BK 157-00044
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.
T50SOSSBD-M10
Сравнете
Fixing tie for stud, outside serrated, ⌀3.0-30.0mm, grey, 100pcs.
T50SOSSBU-M5-PA66HSUV-GY 157-00064
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Grey (GY) T50SOSSBU-M5-PA66HSUV-GY 157-00064
Fixing tie for stud, outside serrated, ⌀2.0-50.0mm, brown, 2000pcs.
Offset design positions bundles away from obstructions, heat or sources of abrasion.
Сравнете
Fixing tie for stud, outside serrated, ⌀2.0-50.0mm, brown, 2000pcs.
T50ROSM6SMSO25-PA46-BN 157-00326
Сравнете
Добавяне към списъка с наблюдавани
2000 pcs.
Brown (BN) T50ROSM6SMSO25-PA46-BN 157-00326
Fixing tie for stud, outside serrated, ⌀2.0-50.0mm, brown, 1500
Offset design positions bundles away from obstructions, heat or sources of abrasion.
Сравнете
Fixing tie for stud, outside serrated, ⌀2.0-50.0mm, brown, 1500
T50ROSM8SMSO25-PA46-BN 157-00328
Сравнете
Добавяне към списъка с наблюдавани
1500 pcs.
Brown (BN) T50ROSM8SMSO25-PA46-BN 157-00328
Fixing tie for screw fixation, inside serrated, ⌀3.0-100.0mm, black, 100pcs.
Screw mount style creates low insertion and high extraction force.
Сравнете
Fixing tie for screw fixation, inside serrated, ⌀3.0-100.0mm, black, 100pcs.
T50ML-PA66-BK 113-00007
Сравнете
Добавяне към списъка с наблюдавани
100
Black (BK) T50ML-PA66-BK 113-00007
Fixing tie for screw fixation, inside serrated, ⌀1.5-85.0mm, black, 1000pcs.
Mount secures firmly with any #10 screw.
Сравнете
Fixing tie for screw fixation, inside serrated, ⌀1.5-85.0mm, black, 1000pcs.
T50MI-PA66-BK 113-00031
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) T50MI-PA66-BK 113-00031
Fixing tie for screw fixation, inside serrated, ⌀1.5-45.0mm, black, 100pcs.
Secures with a screw or bolt.
Сравнете
Fixing tie for screw fixation, inside serrated, ⌀1.5-45.0mm, black, 100pcs.
T50MRX-PA66HS-BK 113-00060
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) T50MRX-PA66HS-BK 113-00060
Fixing tie for edge, inside serrated, ⌀4.0-33.0mm, black, 500pcs.
2-piece fixing tie for edges 1 - 3 mm and harness routing on top parallel to the edge.
Сравнете
Fixing tie for edge, inside serrated, ⌀4.0-33.0mm, black, 500pcs.
T30REC4A-PA66HS/PA66HIRHS-BK 150-76090
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T30REC4A-PA66HS/PA66HIRHS-BK 150-76090
Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
Two piece assembly allows the edge clip to slide along the cable tie strap to ensure proper orientation.
Сравнете
Fixing tie for edge, outside serrated, ⌀1.0-45.0mm, black, 500pcs.
T50ROSEC9-PA66HS/PA66HIRHS-BK 156-05903
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50ROSEC9-PA66HS/PA66HIRHS-BK 156-05903
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
2-piece fixing tie with EdgeClip for side cable routing.
Сравнете
Fixing tie for edge, outside serrated, ⌀4.0-45.0mm, black, 500pcs.
T50ROSEC5B-PA66HS/PA66HIRHS-BK 150-40581
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50ROSEC5B-PA66HS/PA66HIRHS-BK 150-40581
Fixing tie, inside serrated, ⌀1.5-18.0mm, black, 500pcs.
Сравнете
Fixing tie, inside serrated, ⌀1.5-18.0mm, black, 500pcs.
T30SKC0.8-PA66-BK 111-86010
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T30SKC0.8-PA66-BK 111-86010
Fixing tie for edge, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
1-Piece Fixing Tie with EdgeClip for parallel cable routing to the edge.
Сравнете
Fixing tie for edge, outside serrated, ⌀1.0-35.0mm, black, 500pcs.
T50SOSEC34E-PA66W-BK 126-00427
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50SOSEC34E-PA66W-BK 126-00427
Fixing tie for edge, inside serrated, ⌀1.6-15.0mm, black, 500pcs.
1-Piece Fixing Tie with EdgeClip for diagonal cable routing parallel to the edge.
Сравнете
Fixing tie for edge, inside serrated, ⌀1.6-15.0mm, black, 500pcs.
T40XEC5SP-E-PA66HS-BK 133-00059
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T40XEC5SP-E-PA66HS-BK 133-00059
Fixing tie for edge, outside serrated, ⌀1.0-35.0mm, black, 1000pcs.
Сравнете
Fixing tie for edge, outside serrated, ⌀1.0-35.0mm, black, 1000pcs.
T50SOSEC20-E-PA66HS-BK 126-00235
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) T50SOSEC20-E-PA66HS-BK 126-00235
Connector clip for hole (oval), EWCAP-005-23, black, 3500pcs.
Head design contains clamping rails to provide full circumferential compression around bundles.
Сравнете
Connector clip for hole (oval), EWCAP-005-23, black, 3500pcs.
CCOVAL3-PA66HIRHSUV-BK 151-01244
Сравнете
Добавяне към списъка с наблюдавани
3500 pcs.
Black (BK) CCOVAL3-PA66HIRHSUV-BK 151-01244
Connector clip for hole (oval), black, 5000pcs.
Head design contains clamping rails to provide full circumferential compression around bundles.
Сравнете
Connector clip for hole (oval), black, 5000pcs.
CCOVAL4-PA66HIRHSUV-BK 151-01246
Сравнете
Добавяне към списъка с наблюдавани
5000 pcs.
Black (BK) CCOVAL4-PA66HIRHSUV-BK 151-01246
Fixing tie for screw fixation, not serrated, ⌀8.0-86.0mm, black, 1000pcs.
These HDM (Heavy duty mount) are suitable for assembling on screws.
Сравнете
Fixing tie for screw fixation, not serrated, ⌀8.0-86.0mm, black, 1000pcs.
KR8/33HDMP6SET-PA66W/PA66GF15-BK 156-02483
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) KR8/33HDMP6SET-PA66W/PA66GF15-BK 156-02483
Fixing tie for screw fixation, not serrated, ⌀8.0-86.0mm, black, 1000pcs.
These HDM (Heavy duty mount) are suitable for assembling on screws.
Сравнете
Fixing tie for screw fixation, not serrated, ⌀8.0-86.0mm, black, 1000pcs.
KR8/33HDMP8SET-PA66W/PA66GF15-BK 156-02484
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) KR8/33HDMP8SET-PA66W/PA66GF15-BK 156-02484
Fixing tie for screw fixation, not serrated, ⌀8.0-86.0mm, black, 500pcs.
DHDM (Double heavy duty mount) for parallel routing of bundles.
Сравнете
Fixing tie for screw fixation, not serrated, ⌀8.0-86.0mm, black, 500pcs.
KR8/33DHDM6SET-PA66W/PA66GF15-BK 156-02485
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) KR8/33DHDM6SET-PA66W/PA66GF15-BK 156-02485
Fixing tie for screw fixation, not serrated, ⌀8.0-86.0mm, black, 500pcs.
DHDM (Double heavy duty mount) for parallel routing of bundles.
Сравнете
Fixing tie for screw fixation, not serrated, ⌀8.0-86.0mm, black, 500pcs.
KR8/33DHDM8SET-PA66W/PA66GF15-BK 156-02486
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) KR8/33DHDM8SET-PA66W/PA66GF15-BK 156-02486
Cable clip, T=0.7 - 6.35mm, ⌀6.6 mm, Dmin=6.0mm, Dmax=7.6mm
The SC6.6 for solar cables is ideal for quick installation and easy maintenance.
Сравнете
Cable clip, T=0.7 - 6.35mm, ⌀6.6 mm, Dmin=6.0mm, Dmax=7.6mm
SC6.6-PA66HIRHSUV-BK 151-00927
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) SC6.6-PA66HIRHSUV-BK 151-00927
Cable clip for hole (round), ⌀5.0 mm, Dmin=5.5mm, Dmax=6.7mm
Klam-Klips KK1 - 4.
Сравнете
Cable clip for hole (round), ⌀5.0 mm, Dmin=5.5mm, Dmax=6.7mm
KK2-PA6HIR-BK 234-10200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) KK2-PA6HIR-BK 234-10200
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable clip for hole (round), ⌀5.0 mm, Dmin=7.5mm, Dmax=8.5mm
Klam-Klips KK1 - 4.
Сравнете
Cable clip for hole (round), ⌀5.0 mm, Dmin=7.5mm, Dmax=8.5mm
KK4-PA6HIR-BK 234-10400
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) KK4-PA6HIR-BK 234-10400
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
P-clamp closed, Dmax=17.5mm, ⌀5.2 mm, natural, 100pcs.
ALU11-AL-NA 211-10110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) ALU11-AL-NA 211-10110
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=23.8mm, ⌀5.2 mm, black, 100pcs.
ALU17C-AL/CR-BK 211-15170
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) ALU17C-AL/CR-BK 211-15170
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=27.0mm, ⌀5.2 mm, black, 50pcs.
ALU19C-AL/CR-BK 211-15190
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU19C-AL/CR-BK 211-15190
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.
ALU23C P-Clamp with chloroprene insert.
Сравнете
P-clamp closed, Dmax=33.3mm, ⌀5.2 mm, black, 50pcs.
ALU23C-AL/CR-BK 211-15230
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU23C-AL/CR-BK 211-15230
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=34.9mm, ⌀5.2 mm, black, 50pcs.
ALU24C-AL/CR-BK 211-15240
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU24C-AL/CR-BK 211-15240
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=36.5mm, ⌀5.2 mm, black, 50pcs.
ALU25C-AL/CR-BK 211-15250
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU25C-AL/CR-BK 211-15250
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=38.1mm, ⌀5.2 mm, black, 50pcs.
ALU26C-AL/CR-BK 211-15260
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU26C-AL/CR-BK 211-15260
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=41.3mm, ⌀5.2 mm, black, 50pcs.
ALU28C-AL/CR-BK 211-15280
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU28C-AL/CR-BK 211-15280
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=42.9mm, ⌀5.2 mm, black, 50pcs.
ALU29C-AL/CR-BK 211-15290
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU29C-AL/CR-BK 211-15290
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=44.5mm, ⌀5.2 mm, black, 50pcs.
ALU30C-AL/CR-BK 211-15300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU30C-AL/CR-BK 211-15300
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.
P-Clips (Alu) with Rubber Insert for vibration resistance
Сравнете
P-clamp closed, Dmax=50.8mm, ⌀5.2 mm, black, 50pcs.
ALU34C-AL/CR-BK 211-15340
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) ALU34C-AL/CR-BK 211-15340
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.
P-Clamps manufactured in polyamide, aluminium or aluminium with a chloroprene insert.
Сравнете
P-clamp closed, Dmax=12.7mm, ⌀5.2 mm, natural, 100pcs.
ALU8-AL-NA 211-10080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) ALU8-AL-NA 211-10080
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Bundling clip for stud, L=55.0mm, SO=22.8mm, black, 1000pcs.
The slim line BC series is particularly compact and flexible.
Сравнете
Bundling clip for stud, L=55.0mm, SO=22.8mm, black, 1000pcs.
BC2212-PA66HIRHS-BK 151-00017
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Black (BK) BC2212-PA66HIRHS-BK 151-00017
Fixing tie for hole (round), inside serrated, ⌀1-45.0mm, grey, 1000pcs.
Сравнете
Fixing tie for hole (round), inside serrated, ⌀1-45.0mm, grey, 1000pcs.
T50RDHA5.5x15-PA46-GY 156-01203
Сравнете
Добавяне към списъка с наблюдавани
1000 pcs.
Grey (GY) T50RDHA5.5x15-PA46-GY 156-01203
Fixing tie for edge, inside serrated, ⌀4.0-40.0mm, black, 500pcs.
The holding tab increases the tensile strength additionaly.
Сравнете
Fixing tie for edge, inside serrated, ⌀4.0-40.0mm, black, 500pcs.
T50REC2.5B-PA66HS/PA66HIRHS-BK 150-45292
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50REC2.5B-PA66HS/PA66HIRHS-BK 150-45292
Fixing tie for edge, outside serrated, ⌀5.0-50.0mm, black, 500pcs.
The holding tab increases the tensile strength additionaly.
Сравнете
Fixing tie for edge, outside serrated, ⌀5.0-50.0mm, black, 500pcs.
T50ROSEC2.5A-PA66HS/PA66HIRHS-BK 150-45299
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) T50ROSEC2.5A-PA66HS/PA66HIRHS-BK 150-45299
Fixing tie for hole (round), inside serrated, ⌀9.5-82.5mm, black, 100pcs.
Friction tab inside the fir tree allows the 120lb. tensile strength wide-strap cable tie to sit in mount without falling out prior to installation.
Сравнете
Fixing tie for hole (round), inside serrated, ⌀9.5-82.5mm, black, 100pcs.
WSIFT9A-PA66HIRHSUV-BK 156-00069
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) WSIFT9A-PA66HIRHSUV-BK 156-00069
Fixing tie for hole (round), inside serrated, ⌀9.5-105.0mm, black, 100pcs.
Friction tab inside the fir tree allows the 120lb. tensile strength wide-strap cable tie to sit in mount without falling out prior to installation.
Сравнете
Fixing tie for hole (round), inside serrated, ⌀9.5-105.0mm, black, 100pcs.
WSRFT9A-PA66HIRHSUV-BK 156-00070
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) WSRFT9A-PA66HIRHSUV-BK 156-00070
Fixing tie for hole (round), inside serrated, ⌀57.0mm, black, 100pcs.
Friction tab inside the fir tree allows the 120lb. tensile strength wide-strap cable tie to sit in mount without falling out prior to installation.
Сравнете
Fixing tie for hole (round), inside serrated, ⌀57.0mm, black, 100pcs.
WSSFT9B-PA66HIRHSUV-BK 156-00072
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) WSSFT9B-PA66HIRHSUV-BK 156-00072
Fixing tie for hole (oval), inside serrated, ⌀2.5-45.0mm, grey, 500pcs.
T50RFT62X122-HR - Being a two-piece assembly allows the tie head to be located in the most convenient position.
Сравнете
Fixing tie for hole (oval), inside serrated, ⌀2.5-45.0mm, grey, 500pcs.
T50RFT62x122HR-PA46-GY 156-00446
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Grey (GY) T50RFT62x122HR-PA46-GY 156-00446
Cable tie mount for adhesive use, Wmax=4.8mm, Adhesive, black, 50pcs.
Self-adhesive cable tie mount with 360° rotatable design.
Сравнете
Cable tie mount for adhesive use, Wmax=4.8mm, Adhesive, black, 50pcs.
SMB4APT-A-PA66HS/A-BK 151-03334
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) SMB4APT-A-PA66HS/A-BK 151-03334
Cable tie mount for adhesive use, Wmax=4.8mm, Adhesive, black, 50pcs.
Self-adhesive cable tie mount with 360° rotatable design.
Сравнете
Cable tie mount for adhesive use, Wmax=4.8mm, Adhesive, black, 50pcs.
SMB4APT-A-PA66HS/A-BK 151-03364
Сравнете
Добавяне към списъка с наблюдавани
50 pcs.
Black (BK) SMB4APT-A-PA66HS/A-BK 151-03364
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, black, 100pcs.
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm
Сравнете
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀6.5 mm, black, 100pcs.
CL8-PA66W-BK 151-02259
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) CL8-PA66W-BK 151-02259
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=2.5mm, ⌀3.7 mm, M3 Screw, natural, 500pcs.
FH Cable Tie Mounts for areas with limited space.
Сравнете
Cable tie mount for screw fixation, Wmax=2.5mm, ⌀3.7 mm, M3 Screw, natural, 500pcs.
FH18-PA66-NA 151-61119
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Natural (NA) FH18-PA66-NA 151-61119
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=3.5mm, ⌀5.5 mm, natural, 500pcs.
FH Cable Tie Mounts for areas with limited space.
Сравнете
Cable tie mount for screw fixation, Wmax=3.5mm, ⌀5.5 mm, natural, 500pcs.
FH30-PA66-NA 151-61319
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Natural (NA) FH30-PA66-NA 151-61319
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=7.6mm, ⌀6.0 mm, natural, 100pcs.
LKM / CL8 Cable Tie Mounts with curved design.
Сравнете
Cable tie mount for screw fixation, Wmax=7.6mm, ⌀6.0 mm, natural, 100pcs.
LKM-PA66-NA 151-26304
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) LKM-PA66-NA 151-26304
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀5.5 mm, M4 Screw, black, 100pcs.
Сравнете
Cable tie mount for screw fixation, Wmax=8.0mm, ⌀5.5 mm, M4 Screw, black, 100pcs.
LKC-PA66-BK 151-27010
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) LKC-PA66-BK 151-27010
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=13.0mm, ⌀6.0 mm, M6 Screw, natural, 100pcs.
Сравнете
Cable tie mount for screw fixation, Wmax=13.0mm, ⌀6.0 mm, M6 Screw, natural, 100pcs.
LKCSF1-PA66-NA 151-27219
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) LKCSF1-PA66-NA 151-27219
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀3.8 mm, #6 (M3) Screw, white, 100pcs.
Сравнете
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀3.8 mm, #6 (M3) Screw, white, 100pcs.
CTM0-PA66-WH 151-30303
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
White (WH) CTM0-PA66-WH 151-30303
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.8 mm, #8 (M4) Screw, white, 100pcs.
Сравнете
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.8 mm, #8 (M4) Screw, white, 100pcs.
CTM1-PA66-WH 151-30404
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
White (WH) CTM1-PA66-WH 151-30404
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀5.1 mm, #10 (M5) Screw, black, 100pcs.
Сравнете
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀5.1 mm, #10 (M5) Screw, black, 100pcs.
CTM3-PA66-BK 151-30600
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) CTM3-PA66-BK 151-30600
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀5.1 mm, #10 (M5) Screw, white, 100pcs.
Сравнете
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀5.1 mm, #10 (M5) Screw, white, 100pcs.
CTM3-PA66-WH 151-30605
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
White (WH) CTM3-PA66-WH 151-30605
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀6.4 mm, #1/4" (M6) Screw, black, 100pcs.
Сравнете
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀6.4 mm, #1/4" (M6) Screw, black, 100pcs.
CTM4-PA66-BK 151-30700
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) CTM4-PA66-BK 151-30700
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀6.4 mm, #1/4" (M6) Screw, white, 100pcs.
Сравнете
Cable tie mount for screw fixation, Wmax=7.9mm, ⌀6.4 mm, #1/4" (M6) Screw, white, 100pcs.
CTM4-PA66-WH 151-30703
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
White (WH) CTM4-PA66-WH 151-30703
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀6.2 mm, ⌀6.2 mm, #1/4" (M6) Screw, black, 100pcs.
Eliminates the need for multiple sizes of fixed diameter clamps.
Сравнете
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀6.2 mm, ⌀6.2 mm, #1/4" (M6) Screw, black, 100pcs.
HDM25-PA66HIRHSUV-BK 151-00437
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) HDM25-PA66HIRHSUV-BK 151-00437
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀7.8 mm, ⌀7.9 mm, 5/16" (M8) Screw, black, 100pcs.
Mount and tie combination makes it easy to service bundles in the field.
Сравнете
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀7.8 mm, ⌀7.9 mm, 5/16" (M8) Screw, black, 100pcs.
HDM312-PA66HIRHSUV-BK 151-00439
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) HDM312-PA66HIRHSUV-BK 151-00439
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀8.31 mm, ⌀8.0 mm, 5/16" (M8) Screw, black, 500pcs.
Mount and tie combination makes it easy to service bundles in the field.
Сравнете
Cable tie mount for screw fixation, Wmax=12.7mm, ⌀8.31 mm, ⌀8.0 mm, 5/16" (M8) Screw, black, 500pcs.
HDM320-PA66HIRHSUV-BK 151-02094
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) HDM320-PA66HIRHSUV-BK 151-02094
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.5 mm, M4 Screw, natural, 100pcs.
Secures with a single screw, providing quick installation.
Сравнете
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.5 mm, M4 Screw, natural, 100pcs.
CTQM5-PA66-NA 151-10920
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Natural (NA) CTQM5-PA66-NA 151-10920
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.5 mm, M4 Screw, black, 100pcs.
Secures with a single screw, providing quick installation.
Сравнете
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀4.5 mm, M4 Screw, black, 100pcs.
CTQM5-PA66-BK 151-10930
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
Black (BK) CTQM5-PA66-BK 151-10930
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀5.0 mm, M4 Screw, white, 100pcs.
Simple to install with a screw or rivet.
Сравнете
Cable tie mount for screw fixation, Wmax=5.0mm, ⌀5.0 mm, M4 Screw, white, 100pcs.
MB2-PA66-WH 151-28219
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Сравнете
Добавяне към списъка с наблюдавани
100 pcs.
White (WH) MB2-PA66-WH 151-28219
Source products are manufactured with plastics recovered from recycled waste or marine environments, derived from renewable plant-based sources, or use materials with lower equivalent emissions. HellermannTyton also offers product solutions that – by design – reduce waste or support reusability and recyclability.<br/>Sustainable design focuses on product solutions that reduce or avoid waste, i.e. products that can be completely or partially dismantled and repositioned, thus supporting reuse and recyclability. Longevity is not part of this.
Cable tie mount for edge, T=1.0 - 3.0mm, black, 500pcs.
Сравнете
Cable tie mount for edge, T=1.0 - 3.0mm, black, 500pcs.
EC33-PA66HIRHS-BK 151-00192
Сравнете
Добавяне към списъка с наблюдавани
500 pcs.
Black (BK) EC33-PA66HIRHS-BK 151-00192

Pезултати за „GL Series Galvalok“ в Cable Ties and Fixings

HellermannTyton offers a wide range of high-quality cable ties and fixings, including various types of cable ties such as standard, releasable, heavy-duty and detectable zip ties. HellermannTyton cable ties withstand the most extreme environmental conditions and fulfill the most up to date requirements for cable ties and cable tie systems. Zip ties are offten developed in close cooperation with customers, always trying to go beyond technological limitations.

Facebook  Instagram  Twitter  YouTube  LinkedIn  Link Corporate Blog 
Контакт Условия за ползване Отпечатък Насоки и ангажименти Декларация за поверителност Бюлетин Карта на сайта
Актуализиране: 14/12/2025 © HellermannTyton 2025
© HellermannTyton 2025 (v4.292.5) | Актуализиране: 14/12/2025 | Настройките за поверителност
Дистрибутори Контакт