CCE with 1 x LC DX PC Adaptor
Артикулен 857-01444
| CCE-A11121LX1/GY
|
Подробности
- 1 x LC/PC Duplex Adaptor
- Fibre Management for 4 x 3A splices
- Integral positive fibre management and storage capacity
- 6 inbound/outbound access points
- Through the wall capability
- Loop through facility
- Tamper-proof fitting - captive screw and nut
- IP55 Rated
Заявете вашата индивидуална оферта сега
Оферта
Още продукти от тази продуктова група:
Application | The Customer Connection Enclosure (CCE) has been designed to be used as an external building entry point. The closure can be wall mounted providing a fibre termination and external network test point. The CCE has been designed to be the same size as a 'Brick Blow-Out Cover' to cover any unslightly damage caused by drilling. |
Adapter Capacity | 2 |
Cable ∅ max | 8.5mm |
Cable ∅ min | 2.5mm |
Colour | Grey (GY) |
Connector Colour | Blue (BU) |
Connector Type | LC |
Content |
1 x LC/PC Duplex Adaptor Cable Entry Kit 2 x 6.0 - 8.5mm/1 x 2.5 - 6.5mm Mechanical Fixing Kit Wall Mounting Kit Laser Label |
Installed Adapters | 1 |
Material | Acrylonitrile Butadiene Styrene, UV-stabilised (ABSUV) |
PART DESCRIPTION | CCE-A11121LX1/GY |
Pack Cont. | 20pcs. |
Package Content packed in | EA |
Pigtail Cable Capacity | 0 |
Product Family | Fibre Optic External Enclosure |
Product Group | Customer Connection Enclosure |
Short Description | CCE with 1 x LC DX PC Adaptor |
Splice Capacity | 4 |
Technical Description | The Customer Connection Enclosure (CCE) is supplied with 1 x LC/PC Duplex Adaptor. The closure is manufactured from UV stable ABS with a hinged lid which locks in the open position to allow for quick and clear access to the internal fibre. The closure has 6 entry/exit ports at the bottom of the closure and is supplied with 3 cable entry seals 2 x 6.0-8.5mm and 1 x 2.5 - 6.5mm. A loop through facility allows for single fibre elements to be removed and spliced whilst the remaining fibres can be fed on to the next connection point. A single port in the rear of the closure allows for fibre to be passed through the wall into the customer premises. Mechanical fixing is provided to secure all incoming/outgoing cables/blown fibre ducts and to provide strain relief where necessary. Internal positive fibre management and fibre retention clips maintain a minimum 30mm bend radius throughout for up to a maximum of 50m of 1.1mm diameter cable. |
Type | CCE-A11121LX1/GY |
Variant | Outdoor FTTx Enclosures |