MDU S5 with SC-B trays
Артикулен 857-02550
| MDU-S5-LLXS
|
Подробности
- Maximum 432 Fibre Splices
- IR Fibre Management System
- 36 SC-B Trays
- Multiple Loop Storage Management options
- 8 Dual Input/Output positions
- Strength Member Anchor
- In-built spirit level
- IP54/IK08
- UV Stable
- V0 Rating
Заявете вашата индивидуална оферта сега
Оферта
Още продукти от тази продуктова група:
Application | Designed for deployment within the last mile of the FTTx network. This enclosure can be used within a Point to Point (P2P) or Point to Multi Point (P2MP) with the addition of PLC splitters, connectorised or bare end, pigtails and adaptors. |
Colour | Grey RAL 7035 (RAL7035) |
Content |
S5 Enclosure 250µm IR Fibre Management System 36 SC-B Trays ANT 2 Loop Storage Managers 4 x Entry/Exit Port Blanks Strength Member Anchor In-built spirit level Fibre Picker Wall Mounting Kit Red and Green Polyspiral Tubing(2M) Red and Green Velcro Ties(5)" |
Material | Acrylonitrile Butadiene Styrene (ABS) |
PART DESCRIPTION | MDU-S5-LLXS |
Port count | 8 |
Product Family | Fibre Optic External/Internal Enclosure |
Product Group | S5 Series MDU/MBU Enclosures |
Short Description | MDU S5 with SC-B trays |
Technical Description | The S5 enclosure can be configured with either a 250µm or 900µm IR Management System. The position of the fibre management system allows for easy access for the routing of fibre on to the trays. The trays and fibre optic routing modules are white which makes it easy to see the colour of the fibre elements as they are routed through the positive fibre management system. Fibre slot retaining blocks guide the fibre elements on to the IR system; the foam pad on the retainer is partially cut through to accommodate a range of fibre counts. All IR system cover plates are coloured blue identifying them as removable parts allowing access to the fibre, the fibre retaining block and tray retaining clips are coloured red to aid in identification if they are dropped. A 568 x 375 x 165mm (H x W x D) enclosure manufactured in light grey (RAL 7035) ABS (Acrylonitrile Butadiene Styrene). The enclosure is UV stable with an IP54, IK08 and V0 rating. Designed with 8 dual input/output ports, 4 across the bottom, 2 on the top and 2 on each side. Each port will accommodate 2 x 20mm or 25mm cable glands or alternatively a Loop Gland Seal or Drop Cable Seal (each drop cable seal will manage 24 x 7mm drops) can be fitted. A 100 x 25mm inset position on the front cover allows for a customer logo to be moulded in to the enclosure. The S5 MDU enclosure is a modular solution and can be configured in a number of ways to suit the deployment of a specific project or installation. Options include splice trays, loop storage, connectorised versions, splitter accommodation and loop through provision. The S5 can be used with both 900 and 250µm. |
Type | MDU-S5-LLXS |