Argentina
Australia
Brazil
Bulgaria
China
Czech Republic
Denmark
Finland
France
Germany
Hungary
India
Italy
Netherlands
North America
Norway
Poland
Portugal
Romania
Russia
Singapore
Slovenia
South Africa
South Korea
Spain
Sweden
Switzerland
Türkiye
United Arab Emirates
United Kingdom
CCE with 1 x LC DX APC Adaptor and Pigtail
Číslo dílu 857-01451
| CCE-A11121A11/BK
|
Podrobnosti na
- 1 x LC/APC Duplex Adaptor 1 x LC/APC 900μm Pigtail
- Fibre Management for 4 x 3A splices
- Integral positive fibre management and storage capacity
- 6 inbound/outbound access points (2 x 6.0-8.5mm and 1 x 2.5 - 6.5mm)
- Through the wall capability
- Loop through facility
- Tamper-proof fitting - captive screw and nut
- IP55 Rated
Vyžádejte si nyní individuální nabídku
Vyžádat nabídku
Více výrobků v této skupině výrobků:
| Application | The Customer Connection Enclosure (CCE) has been designed to be used as an external building entry point. The closure can be wall mounted providing a fibre termination and external network test point. The CCE has been designed to be the same size as a 'Brick Blow-Out Cover' to cover any unslightly damage caused by drilling. |
| Adapter Capacity | 2 |
| Cable ∅ max | 8.5mm |
| Cable ∅ min | 2.5mm |
| Colour | Black (BK) |
| Connector Colour | Green (GN) |
| Connector Type | LC-APC |
| Content |
1 x LC/APC Duplex Adaptor 1 x LC/APC 900μm Pigtail 1m Cable Entry Kit 2 x 6.0 - 8.5mm/1 x 2.5 - 6.5mm Mechanical Fixing Kit Wall Mounting Kit Laser Label |
| Installed Adapters | 1 |
| Material | Acrylonitrile Butadiene Styrene, UV-stabilised (ABSUV) |
| PART DESCRIPTION | CCE-A11121A11/BK |
| Pack Cont. | 1pc. |
| Package Content packed in | EA |
| Pigtail Cable Capacity | 1 |
| Product Family | Fibre Optic External Enclosure |
| Product Group | Customer Connection Enclosure |
| Short Description | CCE with 1 x LC DX APC Adaptor and Pigtail |
| Splice Capacity | 4 |
| Technical Description | The Customer Connection Enclosure (CCE) is supplied with 1 x LC/APC Duplex Adaptor and 1 x LC/APC 900μm Pigtail 1m. The closure is manufactured from UV stable ABS with a hinged lid which locks in the open position to allow for quick and clear access to the internal fibre. The closure has 6 entry/exit ports at the bottom of the closure and is supplied with 3 cable entry seals 2 x 6.0-8.5mm and 1 x 2.5 - 6.5mm. A loop through facility allows for single fibre elements to be removed and spliced whilst the remaining fibres can be fed on to the next connection point. A single port in the rear of the closure allows for fibre to be passed through the wall into the customer premises. Mechanical fixing is provided to secure all incoming/outgoing cables/blown fibre ducts and to provide strain relief where necessary. Internal positive fibre management and fibre retention clips maintain a minimum 30mm bend radius throughout for up to a maximum of 50m of 1.1mm diameter cable. |
| Type | CCE-A11121A11/BK |
| Variant | Outdoor FTTx Enclosures |
Stáhnout
CCE-A1112XXX1/GY
857-01433
CCE-A11121SX1/GY
857-01435
CCE-A11121TX1/GY
857-01440
CCE-A11121LX1/GY
857-01444
CCE-A11121AX1/GY
857-01448
CCPA-M11XXX/BK-0
857-01106
CCPA-M111SP/BK-0
857-01107
CCPA-M111TP/BK-0
857-01108
CCPA-M111LP/BK-0
857-01109
CCPA-M111AP/BK-0
857-01110
FFE08-03LCPPXX1/BK
857-01790
FFE08-03LCRPXX1/BK
857-01791
FFE08-03LCXXXX1/BK
857-01793
FFE08-03SCSPXX1/BK
857-01794
FFE08-03SCTPXX1/BK
857-01796
FFE08-03SCTS081/BK
857-01797
FFE08-03SCXXXX1/BK
857-01798
FFE08-04LCXXXX1/BK
857-01802
