ICB-S1AXX/WH-A
Číslo dílu 857-02860
| ICB-S1AXX/WH-A
|
Podrobnosti na
- Maximum of 4 customer connections
- Up to 12 x 3A or ANT splices
- Small, low profile design
- Positive fibre management
- 4 corner cable access points
- Through the wall capability
- IP20 and IK07 rating
- Clipped on cover
- UL94 V0 rating
- Multi operator version
Vyžádejte si nyní individuální nabídku
Vyžádat nabídku
Content |
1 x ICB with Single Insert Base 1 x ANT/Crimp Splice Bridge 1 x LC/APC DX Adaptor 1 x QR code instruction Label 1 x Wall Fixing Kit 1 x Cable Retention Fire Clip |
Material | Acrylonitrile Butadiene Styrene alloyed with Polycarbonate (PC/ABS) |
PART DESCRIPTION | ICB-S1AXX/WH-A |
Product Family | Fibre Optic Internal Enclosure |
Splice Capacity | 12 |
Technical Description | The Internal Corridor Box provides a customer connection point within an MDU environment. The ICB allows a multi-fibre cable with a maximum diameter of 2.8mm to be routed along a corridor. The midspan capability allows for a single fibre to be dropped off at each customer location allowing the remainder of the cable to feed additional customer connections. Up to 2m of cable can be stored in the enclosure (or 4m if the cable jacket and aramid yarn are removed), allowing friendly fibre preparation at a nominal working height of 1m. The ICB is designed for horizontal or vertical installation with 4 entry/exit ports (2 at the top and 2 at the bottom of the base). This allows the corridor cable to pass through (inline) from the top or from the bottom or to enter and exit via one of the ports. The box incorporates positive fibre management which ensures the fibres adhere to the minimum bend radius. A fire-resistant metal clip is fitted inside to comply with the current IET Wiring Regulations. The box configured for one adaptor and a splice bridge allows cable replacement in case of installation damage. |
Type | ICB-S1AXX/WH-A |