22/12/2024

Heat shrink marker, thermal transfer print, continuous, 25.4mm/12.7mm, white, 10m
Nr. articol 554-50713 | TLFX254WHX50SM-PO-X-WH Detalii

  • Shrink ratio 2:1
  • Halogen Free
  • Low smoke propagation, density and toxicity
  • High Oxygen Index value (36.5 %)
  • Available in yellow or white
  • Cable range 50.8 mm to 1.2 mm
  • Delivery in convenient storage boxes
arată mai mult

Solicitați acum oferta dumneavoastră individuală

Application TLFX is a halogen free European rail approved 2:1 heat shrink marker material supplied as a continuous tube and printable on both sides. Special material properties show low smoke propagation, density and toxicity. The tubing has been especially prepared so that print performance is excellent at all times. HellermannTyton's printer range allow users to create a high quality print. In addition it is possible to either perforate the tubing at pre-determined lengths or fully sever the markers.
Colour White (WH)
Material Polyolefin, cross-linked (PO-X)
PART DESCRIPTION TLFX254WHX50SM-PO-X-WH
Pack Cont. 10m
Package Content packed in reel
Printable Yes
Product Family TLFX
Product Group Shrinkable tubing 2:1, continuous, thermal transfer
Shrink Ratio 2:1
Type TLFX254WHX50SM
Variant Thin-Wall
With inner glue (Yes/No) No
Length (L) 50mm
Longitudinal Change After Shrinkage -10% max.
Print Method thermal transfer print
Recov. ∅ d max. 12.7mm
Supplied ∅ D min. 25.4mm
Wall (WT) 0.90mm
Dielectric Strength 20kV/mm
Halogen-free Yes
Limited Fire Hazard Yes
Min. Shrink Temperature - °C +120 °C
Operating Temperature -55 °C to +105 °C
ROHS compliant Yes
Recommended Ribbon Type TTDTHOUT
Reel Variant continuous
Specifications
Specifications ASTM D 2671 Proc. B, ASTM E 662, BS-EN ISO 4589-2, BS-EN ISO 4589-3, BS-IEC 60754 Pt1, EN 60696-2-11: 2001, EN ISO 11925-2: 2002, NF F 16-101
Country of Origin GB
ETIM 7.0 Key EC000217
ETIM 8.0 Key EC000217
ETIM 9.0 Key EC000217

Solicitați acum oferta dumneavoastră individuală