Heat Shrink Cable Joint Kit 6-25mm² without Connector Voltage Range 0.6/1 kV
Številka proizvoda 380-04007 | LVK-5x6-25-PO-X-BK | Podrobnosti

Universally suitable to connect cables and conductors
Immediately ready for use
Using a high-quality thermoplastic inner adhesive
Good corrosion protection properties with excellent abrasion resistance and weather resistance
TCP (thermo chromatic paint) spots indicate the sleeve has been sufficiently heated
Resistant to chemical agents and alkaline earths
Excellent shrink behavior
High UV resistance
Halogen free

Zahtevajte svojo individualno ponudbo zdaj

Zahtevajte ponudbo

Poiščite distributerja v svoji bližini

More products in this product group:

Application	LVK is a heat shrinkable straight-through joint for universal connecting of unarmoured polymeric cables or conductors insulated with PVC, PE and XLPE. Suitable for compression and mechanical connectors on aluminium or copper cables. Voltage level 0.6/1.0 (1.2) kV.
Colour	Black (BK)
Content	Outer sleeve, inner sleeves, cleaning cloth, emery cloth, installation instructions
Description	LVK heat shrinkable straight-through joint for universal connecting of unarmoured polymeric cables or conductors
Material	Polyolefin, cross-linked (PO-X)
No. of Inner sleeves	5
No. of Wires	5
No. of outer sleeves	1
PART DESCRIPTION	LVK-5x6-25-PO-X-BK
Pack Cont.	1pc.
Package Content packed in	kit
Product Family	LVK - adhesive lined
Product Group	Heat shrinkable straight-through joint
Short Description	Heat Shrink Cable Joint Kit 6-25mm² without Connector Voltage Range 0.6/1 kV
Shrink Ratio	up to 4:1
Type	LVK-5x6-25
Variant	Shrink Cast
Voltage range	Voltage level 0.6/1.0 (1.2) kV
With inner glue (Yes/No)	Yes

Conductor Size Range mm²	6-25
Height (H)	60mm
Inner Tubing Length (L)	125.0mm
Inner Tubing Recov. ∅ d max.	6.0mm
Inner Tubing Supplied ∅ D min.	22.0mm
Inner Tubing Wall (WT)	2.5mm
Longitudinal Change After Shrinkage	-10% max.
Outer Tubing Length (L)	500.0mm
Outer Tubing Recov. ∅ d max.	16.0mm
Outer Tubing Supplied ∅ D min.	55.0mm
Outer Tubing Wall (WT)	2.7mm
Tube Shape	Round
Weight/Unit	0.267111kg

Adhesive	Hot melt adhesive
Dielectric Strength	20kV/mm
Dielectric Strength test method	ASTM D2671
ELV compliant (Article 4 - 2)	YES
Elongation at break	≥400%(ASTM D2671)
Halogen-free	Yes
Hazardous Goods	No
Limited Fire Hazard	No
Min. Shrink Temperature - °C	+120 °C
Operating Temperature	-55 °C to +110 °C
ROHS compliant	Yes
Shelf Life	5 years
Softening Point Adhesive	+105 °C
Specifications
Tensile Strength	14MPa
UL Listed (US and Canada)	No
UL Listed (US and Canada)	No
UL Recognized (US and Canada)	No
UL Recognized (US and Canada)	No
Voltage Range	0.6/1kV
Volume Resistance	10¹⁴ Ω cm
Volume Resistance test method	IEC 93