Heat shrink marker, thermal transfer print, continuous, 19.0mm/9.5mm, white, 26m
Številka proizvoda 551-41106 | THTT190WH-PVDFX-WH | Podrobnosti

Zahtevajte svojo individualno ponudbo zdaj

Zahtevajte ponudbo

Poiščite distributerja v svoji bližini

More products in this product group:

Application	THTT is a 2:1 high temperature, flame retardant heat shrink marker supplied in continuous tube and on convenient reels that allows printing on both sides if required. The printed marker is ideal for use in applications where high temperature and exposure to aggressive solutions are found. The tubing has been especially prepared so that the print performance is excellent at all times using HellermannTyton's printer range. A standard heat gun with reflector is used to shrink the sleeves onto the wire or cable to achieve a permanent mark. In addition it is possible to either perforate the tubing at pre-determined lengths or fully sever the markers. The material is also especially formulated to be printable with laser beam printers.
Behaviour at low Temperature test method	ASTM D2671
Colour	White (WH)
Fixation Method	Suspend
Heat Aging Test	168h/225°C
Heat Aging test method	ASTM D638
Heat Shock Test	4h/275°C
Material	Polyvinylidene Fluoride cross-linked (PVDFX)
PART DESCRIPTION	THTT190WH-PVDFX-WH
Pack Cont.	26m
Package Content packed in	carton
Printable	Yes
Product Family	THTT – 2:1 Aerospace High Temperature
Product Group	Shrinkable markers "Continuous Tube", thermal transfer
Short Description	High temperature shrinkable markers continuous THTT 2:1 printable 19.0/9.5 white 26m/box = 2 reels
Shrink Ratio	2:1
Type	THTT190WH
Variant	Roller form
With inner glue (Yes/No)	No
With label space	Yes


Height (H)	32mm
Longitudinal Change After Shrinkage	-10% max.
Longitudinal Change After Shrinkage test method	UL 224
Print Method	thermal transfer print
Print Method (Alternative)	laser beam print
Recov. ∅ d max.	9.5mm
Supplied ∅ D min.	19.0mm
Wall (WT)	0.43mm
Weight/Unit	0.05162kg

ELV compliant (Article 4 - 2)	YES
Elongation at break	300 %
Elongation at break test method	ASTM D638
Hazardous Goods	No
Min. Shrink Temperature - °C	+120 °C
Operating Temperature	-55 °C to +225 °C
ROHS compliant	Yes
Recommended Ribbon Type	TTRHT
Reel Variant	continuous
Specifications
Specifications	MIL-STD-202G Method 215K, SAE - AS81531
Tensile Strength	31MPa
Test Method Tensile Strength	ASTM D638
Volume Resistance	10¹² Ω cm
Volume Resistance test method	ASTM D876
Water Absorption	0.50%